Technical data

Product measurements

Thickness approx. 15mm, width 158 mm and length 2180mm (also lengths 2080 and 1818mm allowed). The wear layer thickness is approx. 3,5 mm (with +/- 0.5mm tolerance), thus the product can be sanded, which increases its long-term durability.

Standards and emissions

The product’s technical measurements conform to the requirements of the European standards for parquets. The formaldehyde emission is a tenth of the M1 emission categorizations (research results report VTT2643/00). The glues and surface treatment agents used are produced according to the EN 1432342 standards.

Surface treatments

Ash is produced with sanded surface. In addition, besides the colourless matte finish oil wax and matte oil wax for ash, there are coloured oil waxes; white oil waxed, Snow White double white, Elm light brown and Eben black. Lacquer options are matte finish lacquer, matte lacquer and white lacquer. Ash is available also as unfinished, and the customer can perform the desired surface treatment on the spot. Detailed information on surface treatments can be found in the Surface treatment chart.


Ash’s standard packet sizes are as follows:

Packet sizes
(6 floorboards / packet)

kg/ packet
pallet size
(48 packets
/ pallet)
pallet size
glued floors
(49 packets
/ pallet)
kg/ pallet
2,07 17,0 99,36 101,43 833
1,97 16,5 94,56 96,53 793
1,9 14,25 91,2 93,1 690
1,75 14,5 82,56 84,28 642